What Is the Size of the Hardware Used on Titan Fitness X-2 Power Rack?

Specifications and Summary of the Product This power rack is made of 9 gauge 2′′ × 2′′ steel with welded side bracings, making it one of the most durable additions to any gym! Features: – Comes with 2 J-Hooks (Left and Right Handed). It Includes a 2.25′′ Skinny Pull Up Bar and a 2′′ Fat Pull Up Bar.

Similarly, What holds the bar on a power rack?


Also, it is asked, What can you attach to a power rack?

Bar holders, weight plate horns, and storage trays are among the many attachments and accessories available, as are complete body training items like as dip stations, multi chin-up cross members, monkey bars, u-links, cannonball grips, and ball rebounders.

Secondly, What are J hooks used for power rack?

However, as you may recall from Part 2 of this blog post series, having J-cups/J-hooks with your squat rack is required to complete fundamental motions like the squat, overhead press, and bench press.

Also, What is the width of a power rack?

A smaller power rack (without extensions or attachments) will be 42″ wide, 24″ deep, and 80″ tall. When you factor in the width of a conventional 84″ bar plus the space needed to maneuver around the rack, you’ll need an area that’s 12′ broad, 7′ deep, and 7′ high. That’s a significant size reduction compared to the biggest models.

People also ask, How big are the holes in Titan power rack?

The Titan X-3 is one of Titan’s most popular power racks. 5/8′′ holes, Westside hole spacing, and two height/depth choices are available on this 33 rack.

Related Questions and Answers

What are the things called that hold the weight bar?

Weightlifters who want perfect control over their lifts should use barbell clamps. These handy accessories attach to the end of the barbell and firmly retain weights for a safer weight workout. Clamps may be used for a variety of weightlifting exercises.

What are the things called that hold the barbell?

On barbells and dumbbells, a barbell collar is used to protect the weight disk from getting too loose and dropping off the bar during usage. These goods are affixed to the outside surface of the weight disks after they have been put on the bar.

Is Rogue compatible with Sorinex?

Is Sorinex compatible with Rogue? Rogue power rack attachments are incompatible with Sorinex power racks.

Is Rep Fitness Made in USA?

CAN YOU TELL ME WHERE YOUR PRODUCTS ARE MADE? We produce all around the world. Our mission is to create the finest possible quality items at a price that distinguishes us as a value leader. We’ll get to that perfect spot, whether it’s the United States, China, Mexico, France, or the Moon.

What are Jammer arms for?

Jammer arms are a power rack accessory that simulates the movement of a moving handle used on a variety of fixed weight machines. They are plate-loaded and enable a range of presses, rows, squats, and other exercises to be done inside a power rack, making it more flexible and similar to a multi-gym.

What are J cups for squat rack?

For improved safety, these cups have been laser cut and bent with rounded edges. To protect your barbell, they include a plastic liner and recessed hardware. The 1000 Series J-cups can hold 700 pounds, while the 4000 and 5000 Series J-cups can hold 1,000 pounds.

What are the dimensions of a squat rack?

A squat rack is typically 48 inches long, 48 inches broad, and 92 inches tall. Squat racks, on the other hand, come in a wide range of lengths, widths, and, most importantly, heights.

Will a 6ft barbell fit on a squat rack?

Only a customized, “rackable” variant with a minimum of 51 inches of shaft clearance can fit the less common 6ft barbell on rack machines. However, the “rackable” 6ft barbell only has 6 inches of load area on each end, limiting how much you can lift.

How much clearance do you need above a power rack?

A 72″ short power rack intended for a low ceiling application has an average height of 72″. You’ll need at least 6″ above the rack for fit, and 12″-18″ for headroom if you want to use the pull-up bar at the top of the rack.

How far should power rack be from wall?

My racks are in the center of the floor or approximately 2 feet from the wall. Make sure there’s enough space between the rack and the wall. My power rack was originally set about a foot from the wall, and although it was functional, I found it to be a little too near for comfort.

Do you have to bolt down Titan t3 power rack?

Bolt to the Floor for Extra Safety (Must-Do for Heavy Lifting) The rack’s feet have holes in them for fastening it to the ground. Some folks choose not to secure the rack with bolts. This is OK until you begin to use really heavy weight.

How thick should a power rack be?

With 60mm x 60mm tube, we suggest a minimum of 2mm thick steel. When it comes to power cages, tack welds are useless. Look for an even, clean completed weld that is well-formed all around the edges, particularly around your jay hooks. This ensures longevity while also allowing for a higher weight rating.

What thickness is 11 gauge?

What kind of steel is used for squat racks?

11 gauge steel will be the sweet spot for residential usage. The majority of higher-end rack makers utilize 11 gauge steel, which is 1/8″ thick. For 99.9% of residential uses, this is more than sturdy enough.

Do I need to bolt down my power rack?

The quick answer is that most power racks SHOULD be fastened to the ground permanently. The rationale for this is to prevent the device from moving while in operation. The movement of the large weights will tend to push the rack inch by inch away from its initial position, despite the fact that power racks are quite heavy and generally rather tall.


Titan Fitness is a company that makes fitness equipment. The “titan x-2 accessories” are the parts used on their power rack, which is called Titan X-2 Power Rack.

This Video Should Help:

The “x-2 rack” is a power rack that can be used for weightlifting and bodybuilding. The size of the hardware is unknown, but it is likely to be small.

  • titan x-2 discontinued
  • titan t2 power rack
  • titan x-3
  • titan t2 vs x2
  • rogue fitness
Scroll to Top